KIT89 VT-6912M

Aluminum panel

Features in anodized aluminum panel, which was burnished and polished finish.

Touch Screen Monitor

7" Wide Touch Screen Inside Display Monitor

OSD menu

Graphic on-screen-display texts and icons make it is simple and Welcome menu can be customized.

Color Memory

Image can be recorded both manually and automatically. Up to 120 images capacity, and old images will be replaced by new ones if memory is full.

3 Ways of Camera Mouting - Surfaced mount, Flush mount, Corner mount

Up to 4 outdoor stations or CCTV Cameras via MDS switcher(Optional)

Chord ring melogy

15 chord tunes can be choiced and different rings can be selected to identiy call sources.

FEATURES

• 7 inch Color TFT Touch Screen Monitor (Wide screen)
• Brightness and volume can be adjusted with OSD
• 120 pcs built-in color picture memory
• Save picture by pressing door bell or record button
• Up to 5 monitors connected directly
• 2 door stations connected directly(buil-in 2way board for VT6912M)
• Up to 4 outdoor stations(including CCTV Camera) via MDS switcher (Optional)
• 15 chord melodies for choosing
• Package Contents:
  VT-6912M Monitor, Wall mount bracket, User manual, DC Power supply x 1

FRONT PANEL

Dimensions: 160(H) x 223(W) x 25(D)

1. LCD Touch Screen

2. Loud Speaker

3. TALK Button

4. MENU Button (Right)

5.MONITOR Button (UP)

6. UNLOCK Button (DOWN)

7. CALL Button (Left)

8. MIcrophone

9. MESG Indicator

SPECIFICATIONS

Basic 1-1 System Wiring Diagram

Note1:

• 1R : Power positive. +12V present when Door Station calling or being monitored.
• 2W : Power negative (GND) 3Y : Image signal (Video signal)
• 4B : Talk and control signal (Audio signal)

Note2:

JP-VD is used for setting the video impedance. When there is only one Monitor, keep the jumper (which is already on JP-VD). But when multi Monitors are installed, be sure of taking away all JP-VD of Monitors except only the last Monitor.

Note3: LB includes 3 wiring Terminals:

'1' - Normally Opened Terminal.
'2' - Common Terminal
'3' - Normally Closed Terminal
If the latch is activated when powering, connect it between '1' and '2' terminal; if the latch is deactivated when powering, connect it between '1' and '3' terminal.

Note4: JP-LK is used for Latch selection, refer to Latch connecting parts.

Electronic Latch connecting

With Jumper ( Dry contact mode )

Without Jumper ( DC output for latch mode )

1 Door Station to N VT-6912 Wiring Diagram

2 Door Station to N VT-6912 Wiring Diagram